Using the site · Wall simulator
What the simulator does
Most advice boils a wall down to its U-value, which describes a wall on a day when nothing changes. Real days do change. The sun comes up, the air warms and cools, and the heat takes time to travel through the materials.
This simulator takes a wall or roof, made of layers you choose, and plays out a whole 24-hour day on it. You can watch the heat move through each layer over the day, and see how heavy materials such as brick or concrete soak up heat and give it back later, while light materials such as timber and mineral wool respond quickly.
It calculates:
- Steady-state performance: the U-value and total thermal resistance of your build-up.
- Dynamic performance: how much of the outside temperature swing reaches the inside (the decrement factor) and how long it takes (the decrement delay).
- Temperatures: the temperature in every slice of every layer, plus the surface temperatures on the outer and inner faces, over the day.
- Heat flow: how much heat enters or leaves the room through the wall, compared with what a simple U-value calculation would predict.
- Sun: how much solar radiation lands on a wall facing any bearing, or on a flat or pitched roof facing any way, for a UK location and month.
- Room response (optional): if you let the room float rather than holding it at a set temperature, how the room air itself rises and falls with the wall, windows, ventilation and internal gains.