InsuliserBeta
Using the site · House planner

Starting a project

A new project asks for four things:

  • Postcode: picks the nearest weather station and the ground temperature for your region.
  • House type and age: sets the build-ups, glazing and airtightness to start from, typical of houses that age. You can change all of them later.
  • Width and depth (optional): draws a dashed outline of that size on the plan, to draw the rooms inside.
  • Name: for your own use.

The rooms are always drawn by you. If you'd rather see a finished example first, open one of the demo houses from the Projects page. Each comes with its build-ups, rooms, heating and some upgrade scenarios already made. Each also has a control plan on its system diagram: a combi for the gas houses as found (S plan plus where a boiler has a cylinder), and the heat-pump plan (a hot-water diverter and a zone valve for each zone) for every heat pump. Their pipework is laid one circuit at a time: each zone and the cylinder get their own pipes from the plant, with one riser pipe per zone, so each valve sits on a single run. Least-pipe routing lets every zone share the same trunks, which leaves no one pipe that a zone valve could shut.

Your projects are listed under Project at the top left, with when each was last saved.