InsuliserBeta
Concepts · Heat

The inner face and comfort

The inner face is the surface of the wall inside the room. Its temperature matters for three reasons.

  • Comfort. You feel the temperature of surfaces as well as of the air. A cold wall draws heat from your body by radiation and creates cold draughts at its surface. A rough guide is that the temperature you feel is about the average of the air and surrounding surfaces. A wall several degrees colder than the air makes the room feel colder than the thermostat says.
  • Condensation and mould. Warm indoor air holds moisture. When it touches a surface colder than its dew point, the moisture condenses, and persistently damp surfaces grow mould. A better-insulated wall has a warmer inner face, and that is a big part of why insulation reduces mould risk. The heat simulation does not model moisture itself, but the inner face temperature is the thing to watch, and the Moisture tab tests it directly: see Condensation: surface and interstitial.
  • Heat flow. The gap between the room air and the inner face is directly proportional to how much heat flows through the inside film. When the room air is held steady, the inner face temperature and the heat flow are two views of the same signal.