InsuliserBeta
Using the site · House planner

The planner at a glance

The planner works out how much heat a whole house loses, room by room, what heating it needs, and what that costs to run. You describe the house once, then try changes on copies of it and compare.

The tabs across the top follow the order you work in:

  1. Build-ups: the walls, floors, roofs, windows and doors the house is made of. See Build-ups.
  2. Model: draw the rooms on a floor plan, then set the site, storeys, ventilation, floors and openings. See Drawing the house.
  3. Heating: the flow temperature, a radiator or underfloor loop for each room, and the pipework. See Heating.
  4. Results: heat loss, the year hour by hour, running cost, a check against your bills, mould risk, and a printable report. See Results.

The bar above the tabs shows three things that apply everywhere:

  • Project: the house you are working on. Click it to switch or start another.
  • Scenario: which version of the house you are editing, for example "As built" or "With loft insulation". See Scenarios.
  • Conditions: the outside design temperature every heat loss figure is worked out for. Click it to run other weather.

A number on the Heating tab counts the heated rooms whose heater can't yet cover their heat loss.