Thermal mass
Every material stores heat. To warm a kilogram of brick by one degree takes energy; cooling it by one degree gives that energy back. How much a material stores is set by its density and its specific heat capacity, how much energy one kilogram needs per degree. Multiply the two by the volume and you have the layer's heat capacity, in joules per kelvin.
Think of a wall as a series of buckets joined by narrow pipes. The pipes are the resistances. The buckets are the thermal mass. Pour water in at one end and the first bucket fills first, then the next, and the flow out the far end starts late and is smoothed out. A wall with big buckets (heavy masonry) responds slowly and gently. A wall with tiny buckets (a lightweight frame with mineral wool) lets changes straight through.
Where the mass sits matters as much as how much there is. Mass on the room side of the insulation can exchange heat with the room, so it evens out room temperature. Mass on the outside of the insulation barely meets the room at all. The tool reports inner thermal mass: how much heat the wall soaks up from the room and gives back over a daily cycle.