InsuliserBeta
How the models work · Moisture model

The moisture simulation at a glance

Again, everything is calculated in your browser. The method follows the standard approach for transient heat and moisture in building components (EN 15026, after Künzel). In outline:

  1. Build a typical year of outdoor temperature, humidity, sun and rain showers, in two-hour steps, from the monthly tables.
  2. Cut each layer into thin slices, each with its own temperature and humidity.
  3. At every step, work out the heat flow, and the vapour and liquid water flow, between neighbouring slices and at the two faces.
  4. Update each slice's temperature and the water it holds, storing water along each material's sorption curve.
  5. Shed rain the face can't take up and water condensing in a cavity, and feed in ground moisture.

Every layer starts at 80% humidity in October, and the year is run again and again until it repeats: until a year's wettest and driest month ends are within 2% of the year before's. That takes at least three years, and longer for thick masonry, which can take five to eight to settle; the run stops at twelve. The results come from the last year, by which time that starting guess has washed out. The first year is kept to show whether a wall is still getting wetter.