Insuliser
BetaIt's not all about U
Most insulation tools stop at the U-value. It's the right headline figure, but it describes a wall in a steady state, and our homes live in a world that never stands still: days warm and cool, the sun comes and goes, and the heating switches on and off.
To model a house as it really behaves, you have to follow heat as it soaks into and travels through the materials. Thermal mass gives every wall a decrement factor (how much a temperature swing is damped) and a decrement delay (how long it takes to arrive). Together they can change a home's heating and cooling needs in ways the U-value alone will never show.
Insuliser makes these lesser-discussed sides of insulation easy to see and model.
Free, in your browser. Projects are saved on your device; sign in to keep them in the cloud and open them anywhere.
- A large library of materials and ready-made build-ups, and you can add your own.
- Simulate how a build-up handles heat across a range of conditions.
- Simulate a build-up's moisture: screen for interstitial condensation, long-term moisture build-up and rot risk in organic materials.
- Model a whole house and work out its heat loss at MCS design-day conditions.
- Work out the house's cooling needs in a heatwave.
- Add emitters and size them for the heat source and flow temperature.
- Place the heat source and hot water cylinder, then design the pipe runs for the whole system.
- Pipe sizes, flow rates and pressure drops are calculated for you.
- Try upgrades as scenarios, such as loft insulation, new windows or a heat pump, and see what each change saves, then compare any two room by room.
- 1
Build-ups
Pick the walls, roofs and floors the house is made of, from its age or the materials library.
How this step works → - 2
Model
Draw the rooms on the floor plan, or trace a drawing, and add windows and doors.
How this step works → - 3
Heating
Choose the heat source, size the emitters and route the pipework.
How this step works → - 4
Results
Room-by-room heat loss, running costs, moisture checks and a report for the customer.
How this step works →
Beyond the U-value
Walls are simulated through real days, so you see how thermal mass and sun damp and delay the swings, not just the steady heat loss.
Why the U-value isn't the whole story →Moisture, not just heat
Check a build-up for condensation and wetting before you specify it, which matters most for solid and older walls.
Condensation explained →Heating that fits
Size emitters room by room, route pipework on the plan and compare running costs for a boiler or a heat pump.
Designing the heating →
Using the site
How to drive each tool and read what it shows you.
Concepts
Why walls behave as they do: heat, mass, sun and moisture, with no tool in sight.
How the models work
The maths behind the results, step by step, and what each model leaves out.
Reference
Every term used on the site, in one list.