Using the site · House planner
1. Build-ups
A build-up is one kind of wall, floor, roof, window or door: its layers from outside to inside, and so its U-value. The Project page lists the build-ups this house uses. Only these can be picked when you set a wall or floor on the plan.
- Adding one: pick a preset from the build-up library or make your own from layers.
- Editing one: changes every face that uses it. To try a change on one wall only, duplicate the build-up first and give that wall the copy.
- Materials: the Materials page lists every material with its conductivity (λ), heat capacity and vapour resistance (µ). You can add your own, or fix a resistance for air gaps and foils.
- Ground floors: mark them as a solid slab or suspended timber. Their U-value depends on the whole floor, so it's set on the Floors page.
- Windows and doors: these have a fixed U-value, plus a g-value for how much sun comes through glass.
Each build-up shows its U-value, decrement factor and delay. Simulate opens it in the wall simulator to watch a day of heat flow through it. See What the simulator does.