Using the site · House planner
2. Drawing the house
The floor plan
Draw each storey's rooms with the tools on the left of the Floor plan: a rectangle, a room of any shape, splitting a room in two, and moving corners. Windows, doors, radiators and underfloor loops are placed on the plan the same way. Rooms that share a wall join up, so a wall between two rooms counts as inside, not outside.
- Storeys: switch storey above the plan. The floor and ceiling bands between storeys hold what's under each room, for example a loft or a suspended floor.
- North: turn the plan so walls, windows and roof slopes face the right way. This matters for sun in the year runs.
- Tracing image: upload a floor plan or show a satellite view and draw over it.
- Colour rooms by: heat loss per m², temperature, or whether the heating covers each room.
Click a room and choose Open room for its own page. Faces lists every wall, window, floor and ceiling with its build-up and heat loss, and simulates the room over the design day. Room & outline sets its type, whether it's heated, its temperature and its shape. Windows & doors lists its openings.
The other Model pages
- Site & climate: the weather station and its design temperature (the coldest 0.4% of hours, the MCS default), ground temperature, party walls and room temperatures.
- Storeys & loft: ceiling heights, depth below ground, roofs and loft ventilation. A roof drawn over the top storey gives the rooms under it sloping ceilings and knee walls.
- Ventilation: either a whole-house air leakage figure (estimated, or measured with a blower door test) or standard air change rates for each room type. Also chimneys, fans and heat recovery.
- Floors: the ground floor build-up, foundation edge insulation and the heat lost where the floor meets the walls.
- Windows & doors: every opening in the house in one list.
- Unheated spaces: garages, porches and lofts. Each settles at a temperature between the heated rooms and outside, which sets how much heat the rooms lose into it.
- Checks & history: problems found in the model, such as rooms that overlap, and how the storeys stack.