InsuliserBeta
How the models work · Wall heat model

7. The room

Fixed and schedule modes

The room air temperature is simply prescribed for each time step: a constant, or, for the schedule, the comfort or setback value depending on whether the clock falls inside one of the two heating periods. The room is therefore an input, and the model only calculates what the wall does. In schedule mode the room's own daily swing would otherwise show up in the heat flow, so the decrement factor and decrement delay come from a second run with the room held steady.

Free-floating mode

Now the room air temperature is an unknown too. The room is treated as a single lump of air and furniture with one temperature and one heat capacity, and given its own energy balance:

Croom × dTroom/dt = heat from the wall + (heat through the other fabric, windows and ventilation) + solar gain through the glazing + internal gains

The ingredients come from the sliders:

  • Room heat capacity = air volume × 1.2 kg/m³ × 1005 J/kgK, plus the floor area × the contents' thermal mass (50, 120 or 250 kJ/m²K). The ceiling height is fixed at 2.5 m.
  • Ventilation loss = 0.33 W per m³/h per kelvin × air changes per hour × room volume. This is the standard building-physics shortcut for heating incoming air.
  • Glazing conducts heat with a fixed U-value of 1.4 W/m²K, and lets in sunshine equal to the glazing area × the transmittance factor (g = 0.25, 0.5 or 0.7) × the irradiance on that face.
  • Other external fabric of the room is treated as the same build-up as the modelled wall, at its steady-state U-value, with no sun and no storage of its own.
  • Internal gains (people, appliances, lighting) are a constant in watts.

In each time step, the wall equations and the room equation are solved together. This is possible because the wall's response to the room temperature is a fixed relationship that can be worked out once. As in schedule mode, the decrement factor and decrement delay shown are measured separately, in a second run with the room held steady, since they describe the wall itself, not the room.