How the models work · Wall heat model
What it leaves out
Every model is a simplification. These are the main ones here, so you know how far to trust the numbers.
- Synthetic weather. A smooth idealised day from typical monthly averages, repeated until it settles. No clouds passing, no wind, no multi-day cold spells or heatwaves building up. Temperature and sunshine are set independently by the weather type rather than linked physically.
- One dimension. Heat is assumed to flow straight through a uniform, infinite wall. Real walls have timber studs, mortar joints, wall ties, lintels, window reveals and corners. These thermal bridges let heat bypass the insulation and can raise real heat loss noticeably.
- No moisture in the heat simulation. Damp materials conduct heat better and store more of it, and evaporation and condensation absorb or release heat. None of that is modelled here, and the Moisture tab does not feed back into the heat results either. Vapour movement and condensation are handled separately, with their own limits: see What the moisture model leaves out.
- Little air movement in the wall. Sealed cavities act as a fixed resistance. A ventilated gap is linked to outdoor air at one fixed rate, whatever the wind. Convection within cavities and air leakage through gaps are not modelled.
- Fixed surface films. The outside film is the same whatever the wind speed. The inside film is fixed too, rather than varying with temperature difference, and radiation between room surfaces is not tracked separately from convection.
- Constant material properties. Conductivity, density and heat capacity do not vary with temperature or age.
- Idealised heating. In fixed and schedule modes the room reaches its target instantly, and no limits on heating power are modelled.
- A simple room. The free-floating model is one lump with one temperature. There is no stratification, no other rooms, no floor or ground coupling, glazing is a single area with a fixed U-value, and sunlight through windows is spread into the room's air rather than falling on particular surfaces.
- One sunlit face. Only the modelled wall and its glazing see the sun. The "other external fabric" does not.